Project

Publications

Doping effects on the tribological performance of diamond-like carbon coatings: A review - ScienceDirect

Abstract

Diamond-like carbon (DLC) coatings have garnered considerable interest due to their unique features, which include wear resistance with a low friction coefficient, high hardness, biocompatibility, and chemical inertness. Their tribological performance is highly dependent on tribological environment, structure, and mechanical properties of the coating. A major problem that can adversely impact the tribological properties of the DLC coating is insufficient adhesion to the substrate. This issue caused by mismatch of the substrate and coating thermal expansion coefficient (TEC) and high amount of internal stress in DLC coating. The limitations of DLC coatings for tribological performance can be overcome by incorporating different types of metallic and non-metallic elements into the coating structure. Recently, various efforts have been made to address this issue by doping certain elements into the DLC coating, including fluorine, nitrogen, silicon, and metals. This review discusses new advancements in doped DLC coatings designed to improve their tribological behavior in different specific applications such as high relative humidity, elevated temperature, and bio-implant.

Doping effects on the tribological performance of diamond-like carbon coatings: A review

Link

Secondments

ERA Talents

Assoc. Prof. Amirhossein Pakseresht, PhD.

Head of the Department of Coatings

Researcher

ORCID: 0000-0001-6548-8113

Publication activity:

Books: 4
Chapters in monographs: 4
publications in scientific journals: +55
Contributed lectures at conferences: 24
Invited lectures: 4
Citations: +2100
h-Index: 26
Patents: 5
Editor and Guest editor of Journals: 7

The most significant publications :

2022

Pakseresht, Amirhossein and Omid Sharifahmadian, editors. Handbook of Research on Tribology in Coatings and Surface Treatment. IGI Global, 2022, (pp. 1-470).
Alebrahim, M., Pakseresht, A., Jafari, R., and Galusek, D., (2022). The Effect of Additional Ceramic Fiber on Wear and Mechanical Properties of Thermal Barrier Coatings. In A. Pakseresht, & O. Sharifahmadian (Ed.), Handbook of Research on Tribology in Coatings and Surface Treatment (pp. 1-19). IGI Global. Chapter 1
Pakseresht, A., and et al. (2022). Failure mechanisms and structure tailoring of YSZ and new candidates for thermal barrier coatings: a systematic review. Materials & Design, 111044.
Trentin, , Pakseresht, A., Duran, A., Castro, Y., & Galusek, D. (2022). Electrochemical Characterization of Polymeric Coatings for Corrosion Protection: A Review of Advances and Perspectives. Polymers, 14(12), 2306.
Parchovianská, I., Parchovianský, M., Pecušová, B., Hanzel, O., & Pakseresht, (2022). Synthesis and Characterization of Fluorite-Type La2Ce2O7 Plasma Sprayable Powder for TBCs Application. Materials, 15(11), 4007.
Amirtharaj Mosas, K. K., Chandrasekar, A. R., Dasan, A., Pakseresht,, & Galusek, D. (2022). Recent Advancements in Materials and Coatings for Biomedical Implants. Gels, 8(5), 323.
Parchovianský, M., Parchovianská, I., Hanzel, O., Netriová, Z., & Pakseresht, A. (2022). Phase Evaluation, Mechanical Properties and Thermal Behavior of Hot-Pressed LC-YSZ Composites for TBC Applications. Materials, 15(8), 2839.
Rozman, M., Štukovnik, Z., Sušnik, A., Pakseresht, A., Hočevar, M., Drobne, D., & Bren, U. (2022). A HepG2 Cell-Based Biosensor That Uses Stainless Steel Electrodes for Hepatotoxin Detection. Biosensors, 12(3), 160.
Rozman, M., Mavrič, A., Kravanja, G., Valant, M., & Pakseresht, A. (2022). Ultra-low-cost, flexible and durable electrochromic tape device based on aluminum foil. Electrochimica Acta, 404, 139760.

2021

Pakseresht, A. H., Mousavi, S. M., Saremi, M., Ghasali, E., & Rajaei, H. (2021). Microstructure and mechanical properties of YSZ-alumina composites designed for thermal barrier coatings. Materials at High Temperatures, 38(1), 23-30.
Sharifianjazi, F., Esmaeilkhanian, A., Moradi, M., Pakseresht, A., Asl, M. S., Karimi-Maleh, H., … & Varma, R. S. (2021). Biocompatibility and mechanical properties of pigeon bone waste extracted natural nano-hydroxyapatite for bone tissue engineering. Materials Science and Engineering: B, 264, 114950.
Abuchenari, A., Sharifianjazi, F., Pakseresht, A., Pudineh, M., & Esmaeilkhanian, A. (2021). Effect of aluminum on microstructural and magnetic properties of nanostructured (Fe85Ni15) 97Al3 alloy produced via mechanical alloying. Advanced Powder Technology, 32(2), 337-345.

2020

Pakseresht, A. H., Kimiayi, A., Alizadeh, M., Nuranian, H., & Faeghinia, A. (2020). Microstructural study and hot corrosion behavior of bimodal thermal barrier coatings under laser heat treatment. Ceramics International, 46(11), 19217-19227.
Sharifianjazi, F.; Pakseresht, A. H. .; Shahedi Asl, M. .; Esmaeilkhanian, A. .; Nargesi khoramabadi, H. .; Won Jang, H.; Shokouhimehr, M. Hydroxyapatite Consolidated by Zirconia: Applications for Dental Implant. compos. compd. 2020, 2, 26-34.
Ghambari, M., Ebadzadeh, T., Pakseresht, A. H., & Ghasali, E. (2020). Preparation of Ag/reduced graphene oxide reinforced copper matrix composites through spark plasma sintering: an investigation of microstructure and mechanical properties. Ceramics International, 46(9), 13569-13579.
Sharifianjazi, F., Moradi, M., Parvin, N., Nemati, A., Rad, A. J., Sheysi, N., … & Asl, M. S. (2020). Magnetic CoFe2O4 nanoparticles doped with metal ions: a review. Ceramics International, 46(11), 18391-18412.
Sharifianjazi, F., Moradi, M., Abouchenari, A., Pakseresht, A. H., Esmaeilkhanian, A., Shokouhimehr, M., & Asl, M. S. (2020). Effects of Sr and Mg dopants on biological and mechanical properties of SiO2–CaO–P2O5 bioactive glass. Ceramics International, 46(14), 22674-22682.
Targhi, V. T., Omidvar, H., Sharifianjazi, F., & Pakseresht, A. (2020). Hot corrosion behavior of aluminized and Si-modified aluminized coated IN-738LC produced by a novel hot-dip process. Surfaces and Interfaces, 21, 100599.
Abbaszadeh, S., Pakseresht, A., Omidvar, H., & Shafiei, A. (2020). Investigation of the High-Temperature Oxidation Behavior of the Al0. 5CoCrFeNi High Entropy Alloy. Surfaces and Interfaces, 21, 100724.

2019

A.H.Pakseresht*, M.Saremi, H. Omidvar, M.Alizadeh, Micro-structural study and wear resistance of thermal barrier coating reinforced by alumina whisker, Surface and coating technology, Vol. 366, pp. 338-348, 2019.
Kamyar Shirvanimoghaddam, Ehsan Ghasali, Amirhossein Pakseresht, SMR Derakhshandeh, Masoud Alizadeh, Touradj Ebadzadeh, Minoo Naebe, Super hard carbon microtubes derived from natural cotton for development of high performance titanium composites, Journal of Alloys and Compounds, vol. 775, pp. 601-616, 2019.

2018

Derakhshandeh, A.H. Pakseresht et al. Comparison of spark plasma and microwave sintering of mullite based composite: mullite/Ta₂O₅ reaction, Ceramic International, vol. 44, pp.13176-13181, 2018
A.H.Pakseresht*, Microstructural Investigation of BaTiO₃ Plasma Sprayed Coating Deposited by Splash and Disk-Like Splats , Journal of Environmental Friendly Materials, Vol. 2, No. 1, 2018, 1-6
H.Alizadeh, A.H.pakseresht, et al., The Effect of accelerator types on the phosphate Zn-%12Ni electrodeposite coating, Material Sci & Eng. Int . Journal, Vol.2, pp. 224-229, 2018
A.H. Pakseresht, Editor of “Production, Properties, and Applications of High Temperature Coatings” IGI Global, USA, pp.,1-557, 2018
Hasanzadeh, A.H. Pakseresht, et al.” Investigation on improved-durability thermal barrier coatings- an overview of nanostructured, multilayered and self-healing TBCs” IGI Global, 2018 ,USA, 20-30. Chapter 3
Ashrafiyan, A.H. Pakseresht, et al.” Oxidation-Protective Coatings for Carbon-Carbon Composites” IGI Global, 2018 ,USA, 250-260. Chapter 16

2017

Shirvanimoghaddam, A.H.Pakseresht, et. al, Review: Carbon fiber reinforced metal matrix composites: Fabrication processes and properties, Composites Part A: Applied Science and Manufacturing, Vol. 92, pp 70-96, 2017
E.Ghasali, K. Shirvanimoghaddam, A.H. Pakseresht, M. Alizadeh, , T.E badzadeh, Vanadium carbide reinforced aluminum matrix composite prepared by conventional, microwave and spark plasma sintering, Evaluation of microstructure and mechanical properties of Al-TaC composites prepared by spark plasma sintering process, Journal of Alloys and Compounds,Vol. 705, pp 283-289, 2017
Alireza Jam, Seyed Mohammad Reza Derakhshandeh, HoseinRajaei, Amir Hossein Pakseresht*, Evaluation of microstructure and electrochemical behavior of dual-layer NiCrAlY/mullite plasma sprayed coating on high silicon cast iron alloy, Ceramic International, Vol 43, pp 14146-14155, 2017
E.Ghasali, M.Alizadeh, A.H. Pakseresht, T.E badzadeh, Preparation of silicon carbide/carbon fiber composites through high-temperature spark plasma sintering, Journal of Asian Ceramic Societies, Vol. 5, pp. 472-478, 2017
Bagheri, M.R. Vaezi, A. Ghader, A.H.Pakseresht et al, Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method,Jorunal ofAdvanced CeramicsProgress, Vol. 3. Pp 21-24, 2017

2016

A.H. Pakseresht, A. H. Javadi, M.Bahrami, A.Simchi, Spark plasma sintering of a multilayer thermal barrier coating on Inconel 738 superalloy: Microstructural development and hot corrosion behavior, Ceramic International, Vol. 42, No. 2, pp. 2770-2779, 2016
A.H. Pakseresht, A. H. Javadi, E. Ghasali, A. Shahbazkhan, S. Shakhesi, Evaluation of hot corrosion behavior of plasma sprayed thermal barrier coatings with graded intermediate layer and double ceramic top layer. Surface and coating technology, Vol. 288, pp 36-45. 2016
A.H. Pakseresht*, M.R. Rahimipour, M.R. Vaezi, M. Salehi, Effect of heat treatment on the microstructure and dielectric property of plasma sprayed Barium titanate films, International Journal of Materials Research, vol. 107, pp. 28 -34, 2016
A.H. Pakseresht, H. AhmadianBaghbaderani,Role of different fractions of nano-size SiC and milling time on the microstructure and mechanical properties of Al-SiCnanocomposites, Transactions of the Indian Institute of Metals, Vol., 69, pp.1007-1014, 2016
A.H. Pakseresht*, M.R. Rahimipour, M.R. Vaezi, M. Salehi ,Thermal plasma spheroidization and spray deposition of barium titanate powder and characterization of the sprayable powder, Materials Chemistry and Physics, Vo; 173, pp. 395-403, 2016
K. Shirvanimoghaddam, A. H. Pakseresht, Effect of B4C, TiB2 and ZrSiO4 ceramic particles on mechanical properties of aluminium matrix composites: experimental investigation and predictive modeling, Ceramic International, Vol. 42, pp. 6206-6220, 2016
K. Shirvanimoghaddam , H. Khayyam, H.Abdizadeh, M. Akbari, A.H.Pakseresht, E.Gasali, M. Naebe, Boron carbide reinforced aluminium matrix composite: Physical, mechanical characterization and mathematical modelling, Materials Science & Engineering A, Vol. 658, pp. 135-149, 2016
E.Ghasali, A.H. Pakseresht, M. Alizadeh, K. Shirvanimoghaddam, T.E badzadeh, Vanadium carbide reinforced aluminum matrix composite prepared by conventional, microwave and spark plasma sintering, Journal of Alloys and Compounds,Vol. 688, pp 527-533, 2016
A.H. Pakseresht, M.R. Rahimipour,M. Alizadeh, S.M.M. Hadavi”Concept of advanced thermal barrier functional coatings in high temperature engineering components” IGI Global, 2016 ,USA, 396-419

2015

A.H. Pakseresht*, M.R. Rahimipour, M.R. Vaezi, M. Salehi, Effect of splat morphology on microstructure and dielectric property of plasma sprayed Barium titanate films, Applied Surface Science,Vol. 324, pp. 797–806, 2015
A.H. Pakseresht, A.H. Javadi, M. Nejati, K. Shirvanimoghaddam, E. Ghasali, R. Teimouri, Statistical analysis and multiobjective optimization of process parameters in plasma spraying of partially stabilized zirconia, International Journal of Advanced Manufacturing Technology, Vol. 75, pp. 739-753. 2015
H. Pakseresht, E. Ghasali, M. Nejati, K. Shirvanimoghaddam, A. H. Javadi, and R. Teimouri, “Development empirical-intelligent relationship between plasma spray parameters and coating performance of Yttria-Stabilized Zirconia,” The International Journal of Advanced Manufacturing Technology, Vol. 76, pp-1031-1045, 2015
E.Ghasali, A.H. Pakseresht, F. Safari, M.Aghili, T.E badzadeh, Investigation on microstructure and mechanical behavior of Al–ZrB2 composite prepared by microwave and spark plasma sintering, Materials Science & Engineering A, vol.627, pp.27-30, 2015
A.H. Pakseresht*, M.R. Rahimipour, M.R. Vaezi, M. Salehi, Effect of morphology and nonbounded interface on dielectric properties of plasma sprayed BaTiO₃ Coating, Journal of Advanced Materials and Processing, Vol.2, No. 4, pp. 25-32, 2014
M.R. Loghman, M. Nejati, H.Edris, H.Jamali, A.H.Pakseresht, Evaluation of hot corrosion behavior of plasma sprayed Scandia and yttria co-stabilized nanostructured thermal barrier coatings in the presence of molten sulfate and vanadate salt, Journal of European Ceramic Society, Vol. 35, no. 2, pp. 693-702, 2015
K. Shirvanimoghaddam, H. Abdizadeh, F. Abdi, A.H. Pakseresht, A.Shahbazkhan, A. Abbasi, Investigation of discontinuously reinforced aluminium metal matrix composite fabricated by two different micron ceramic reinforcements (ZrSiO_4, B₄C): Comparative Study, journal of metallic material, Vol. 53, pp-1-7, 2015
E.Ghasali, M.Alizadeh, T.E badzadeh, A.H. Pakseresht, Investigation on microstructural and mechanical properties of B 4 C–aluminum matrix composites prepared by microwave sintering, Journal of materials research and technology, Vol.4, No. 4, pp. 411-415, 2015
M. Nejati, M.R. Rahimipour, I. Mobasherpour and A.H. Pakseresht, Microstructural analysis and thermal shock behavior of CSZ, CSZ/Micro Al₂O₃ and CSZ/Nano Al₂O₃ plasma sprayed thermal barrier coatings, Surface and coating technology, Vol.282, pp. 129-138, 2015

Omid Sharifahmadian, PhD.

Department of Coating Processes

Researcher

ORCID: 0000-0002-5018-7235

Publication activity

Co-editor of Conference proceedings: 1

Chapters in monogrphs: 1

Publications in scientific journals: 19

Contributed lectures at conferences: 8

Citations: 456

Book : 1

2024

Aiken Dao, Christale Gaitanos, Sumedh Kamble, Omid Sharifahmadian, Richard Tan, Steven G. Wise, Tiffany Lai Yun Cheung, Marcela M.M. Bilek, Paul B. Savage, Aaron Schindeler, Behnam Akhavan “Antibacterial Plasma Polymer Coatings on 3D Materials for Orthopedic Applications “, Advanced Materials Interfaces 11, 2470005.

2023

Omid Sharifahmadian, Amirhossein Pakseresht, Kamalan Kirubaharan Amirtharaj Mosas, Dušan Galusek, “Doping effects on the tribological performance of diamond-like carbon coatings: A review“, Journal of Materials Research and Technology 27, 7748-7765.
Omid Sharifahmadian, Amirhossein Pakseresht, Saeed Mirzaei, Marek Eliáš, Dušan Galusek “Mechanically robust hydrophobic fluorine-doped diamond-like carbon film on glass substrate” Diamond and Related Materials 138, 110252.
Omid Sharifahmadian, Amirhossein Pakseresht, Saeed Mirzaei, Marek Eliáš, Dušan Galusek “Design and development of highly robust hydrophobic plasma polymer film on glass substrate” 36th European Conference on Surface Science 28 Aug - 1 Sep 2023, Lodz, Poland.
Omid Sharifahmadian, Amirhossein Pakseresht, Saeed Mirzaei, Marek Eliáš, Dušan Galusek “Hydrophobic plasma polymer film deposited on glass substrate: structural evolution and nanomechanical properties” PROCESSING AND PROPERTIES OF ADVANCED CERAMICS AND GLASSES October 25-27, 2023, Stará Lesná, Slovak Republic.

2022

Amirhossein pakseresht, Omid Sharifahmadian, “Handbook of Research on Tribology in Coatings and Surface Treatment: Technology, Properties, and Applications”, IGI Global Publication, USA, 2022.
Omid Sharifahmadian, Amirhossein Pakseresht, Dušan Galusek “Fabrication of robust hydrophobic carbon based film on glass substrate by Plasma-enhanced chemical vapor deposition (PECVD)” Czech and Slovak Conference on Glass 2022, 2022, Prague, Czech Republic.

2021

Omid Sharifahmadian, Chongpu Zhai, Juichien Hung, Ghazal Shineh, Callum A.C. Stewart, Arifah A. Fadzil, Mihail Ionescug, Yixiang Gan, Steven G. Wise, Behnam Akhavan “Mechanically robust nitrogen-rich plasma polymers: Biofunctional interfaces for surface engineering of biomedical implants”, Materials Today Advances,12, 100188, 2021.
Omid Sharifahmadian, Ashokraja Chandrasekar, Amirhossein Pakseresht, “Preparation and Fabrication of Yttria-Stabilized-Zirconia (YSZ) Coatings by Electrophoretic Deposited (EPD) Process” Processing And Properties Of Advanced Ceramics And Glasses, October 13-15, 2021, Osrblie, Slovakia.

2020

Michiel Croesa, Behnam Akhavan, Omid Sharifahmadian, Haiyang Fane, Raya Mertense, Richard P. Tand, Aliza Chunarac, Arifah A. Fadzil, Steven G. Wised, Moyo C. Kruyta, Sebastiaan Wijdicksa, Wim E. Henninkh, Marcela M.M. Bilek, Saber Amin Yavaria, “A multifaceted engineering platform to improve the longevity of orthopedic implants”, Acta Biomaterialia, 2020.
Omid Sharifahmadian, Farzad Mahboubi. “RSM study on the influence of nitrogen flow rate and deposition temperature on the tribological properties of nitrogen doped diamond-like carbon coating”, Surfaces and Interfaces, 19, 100407, 2020.

2019

Omid Sharifahmadian, Farzad Mahboubi, “Comprehensive tribological study of optimized N-DLC/DLC coatings fabricated by active screen DC-pulsed PACVD technique”, Ceramics International, 2019.
Omid Sharifahmadian, Farzad Mahboubi, Sepehr Yazdani, “Comparison between corrosion behaviour of DLC and N-DLC coatings deposited by DC-pulsed PACVD technique”, Diamond and Related Materials, 2019, 95, 60-70.
Omid Sharifahmadian, Farzad Mahboubi. “A comparative study of microstructural and tribological properties of N-DLC/DLC double layer and single layer coatings deposited by DC-pulsed PACVD process”, Ceramics International, 2019.
Omid Sharifahmadian, Farzad Mahboubi. Ata Oskouie, “Structural evolution and tribological behavior of nitrogen-doped DLC coatings deposited by pulsed DC PACVD method”, Diamond and Related Materials, 2019, 91, 74-83.
Sepehr Yazdani, Farzad Mahboubi, Reaz Tima, Omid Sharifahmadian, “Effect of CNTs concentration on the corrosion behaviour of the electroless Ni-B-CNT coating”, Journal of Materials Engineering and Performance, 28, 3446–3459, 2019.

2018

Behnam Akhavan, Thomas D Michl, Carla Giles, Kitty Ho, Lewis Martin, Omid Sharifahmadian, Steven G Wise, Bryan R Coad, Naresh Kumar, Hans J Griesser, Marcela M Bilek, “Plasma activated coatings with dual action against fungi and bacteria”, Applied Materials Today,2018,12, 72-84.

2013

Sharifahmadian, H. Salimi Jazi, M. H. Fathi, J. Mostaghimi, L. Pershin,“Relationship between surface properties and antibacterial behavior of wire arc spray copper coatings”, Surface & Coatings Technology journal, Volume 233, 2013, Pages 74–79.
Sharifahmadian, H. Salimi Jazi, M. H. Fathi, J. Mostaghimi, L. Pershin, “Study of the Antibacterial Behavior of Wire Arc Sprayed Copper Coatings”, Journal of Thermal Spray Technology, March 2013, Volume 22, Issue 2-3, pp 371-379.

2012

Sharifahmadian, H. Salimi Jazi, M. H. Fathi, J. Mostaghimi, L. Pershin, “Wire arc spray copper coatings for medical applications”, Proceedings of the International Thermal Spray (ASM International) Published: May 2012, pages 210-214.
Sharifahmadian, H. Salimi Jazi, M. H. Fathi, J. Mostaghimi, L. Pershin, “Wire Arc Spray Copper Coatings in Medical Applications” International Thermal Spray 2012 Conference and Exposition May 21-24, 2012 Hilton Americas Houston, Texas USA.

2011

Sharifahmadian, H. Salimi Jazi, M. H. Fathi, J. Mostaghimi, L. Pershin, “Study the microstructure and antibacterial behavior of as-sprayed copper coatings” 3rd International Conference on Ultra Fine Grained and Nano-Structured Materials (UFGNSM 2011), 2011 Tehran, Iran.
Sharifahmadian, H. Salimi Jazi, M. H. Fathi, “Preparation and Characterization of thermal spray copper coatings in medical application” 5th Joint Conference of Iranian Metallurgical Engineers Society and Iranian Foundry men’s Society, 2011, Isfahan, Iran.

Education

2009: B. S.: Isfahan University of Technology, Isfahan, Iran, Department of Materials Engineering, Extractive Metallurgy Engineering. Thesis: Synthesis and Characterization of Nano Forsterite – Hydroxyapatite Composite.
2012: M. S.: Isfahan University of Technology, Isfahan, Iran, Department of Materials Engineering, Materials Engineering. Thesis: Preparation and Characterization of Wire Arc Sprayed Nanostructure Metallic Antibacterial Coating for Medical Application.
2019: Ph.D.: Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran, Department of Mining and Metallurgical Engineering, Materials Engineering. Thesis: Effect of Nitrogen on The Properties of The Gradient Diamond-Like Carbon (DLC) coating by active screen DC-pulsed PECVD technique.
2017: Visiting Scholar: The University of Sydney, Sydney, Australia, The Applied Plasma and Surface Engineering Research Group, School of Engineering. Project Title: Design and Manufacturing of Plasma Polymer Coating on 3D Titanium Scaffold For Bone Implantations.
2021 & 2022: Visiting Scholar: Nano Research Infrastructure group at Central European Institute of Technology (CEITEC) in Brno, Czech Republic. Project Title: Fabrication and characterization of hydrophobic and wear-resistant (F, Si) hydrogenated DLC film on glass substrate by PECVD technique.

Awards, scholarships and research stays:

Training course in AGC company in Lauenförde, Germany to get training about the possibilities to fabricate thin films by utilizing FunGlass new pilot coater line machine.
Doctoral thesis “ Effect of Nitrogen on The Properties of The Nano-Structured Gradient Diamond-Like Carbon (DLC) coating by active screen DC-pulsed PECVD technique” awarded as a top thesis in Amirkabir University of Technology, Iran, 2019.
Awarded scholarship from Ministry of Science, Research and Technology of iran for research opportunity in foreign, Iran, 2016.
Top 5% ranked student among students of Extractive Metallurgy Engineering in B.Sc. degree in Isfahan University of Technology and accepted in M.Sc. without entrance exam as a superior student in this university.
Top 10% ranked student among students of Materials Engineering in M.Sc. degree in Isfahan University of Technology.

Other activities:

Served as reviewer and Editor in some international scientific journals.
Membership of Slovak Glass Society.
Participation in some workshops, training schools, and scientific meetings.

Ing. Pavel Gejdoš, PhD.

High-Performance Materials and Coatings for Industry Research Group

Researcher

Research ID: E-3735-2012

Publication activity:

publications in scientific journals (WOS): 12
publications in scientific journals (Scopus): 42
citations (WOS) 94
h-Index (WOS): 4

The most significant publications:

2023

MOHAN, M.; BUDAY, J.; PROCHAZKA, D.; GEJDOŠ, P.; POŘÍZKA, P.; KAISER, J. Laser-induced plasma on the boundary of two matrices. Journal of Analytical Atomic Spectrometry, 2023, roč. 38, č. 1, s. 2433-2440. ISSN: 1364-5544.

SLÁMEČKA, K.; KASHIMBETOVA, A.; TKACHENKO, S.; GEJDOŠ, P.; POKLUDA, J.; MONTUFAR JIMENEZ, E.; ČELKO, L. Fatigue performance of hierarchically porous titanium scaffolds produced by additive manufacturing and its possible improvement by gas nitriding. In Journal of Physics: Conference Series. Journal of Physics: Conference Series. BRISTOL: IOP PUBLISHING LTD, 2023. ISSN: 1742-6588.

2022

VRAŽINA, T.; ŠULÁK, I.; POLOPRUDSKÝ, J.; ZÁBRANSKÝ, K.; GEJDOŠ, P.; HADRABA, H.; ČELKO, L. Influence of the Deposition Parameters on Microstructure anad Properties of HVOF Sprayed WC-CrC-Ni Coating. In Proceedings 31st International Conference on Metallurgy and Materials. 28th International Conference on Metallurgy and Materials. Tanger Ltd., 2022. s. 487-492. ISBN: 978-80-88365-06-8. ISSN: 2694-9296.

ZÁBRANSKÝ, K.; KLAKURKOVÁ, L.; GEJDOŠ, P.; JULIŠ, M.; ŠVEJCAR, J. Analysis of the Causes of Shaft Damage. In Key Engineering Materials. Key Engineering Materials (web). Switzerland: Trans Tech Publications Ltd, 2022. s. 133-138. ISSN: 1662-9795.

GEJDOŠ, P.; JULIŠ, M.; KLAKURKOVÁ, L.; DYČKA, M. Interaction of AZ91 Magnesium Alloy with Ceramic Shell during Investment Casting. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. s. 31-36. ISSN: 1012-0394.

KASHIMBETOVA, A.; TKACHENKO, S.; REMEŠOVÁ, M.; MATA-LEIJA, A.; GEJDOŠ, P.; ČELKO, L.; MONTUFAR JIMENEZ, E. Correlating the Microstructure with the Mechanical Behaviour of Titanium Structures Produced by Robotic Assisted Deposition. In Structural and Functional Materials. Solid State Phenomena. Switzerland: Trans Tech Publications Ltd, 2022. s. 26-30. ISSN: 1012-0394.

2021

KUSMIČ, D.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; VILIŠ, J.; ČECH, O. The Corrosion Resistance of Hard Anodised EN AW 7075 T6 Alloy. In ECS Transactions. ECS Transaction. 105. Electrochemical Society, 2021. s. 329-337. ISBN: 9781607685395. ISSN: 1938-6737.

TKACHENKO, S.; KASHIMBETOVA, A.; GEJDOŠ, P.; OLIVER-URRUTIA, C.; CASAS LUNA, M.; JULIŠ, M.; MONTUFAR JIMENEZ, E.; ČELKO, L. Effects of the Heat Treatment Temperature on Composition, Microstructure and In Vitro Mineralization of Alkali Treated Titanium. In Proceedings 30th Anniversary International Conference on Metallurgy and Materials. Tanger, 2021. s. 1186-1191. ISBN: 978-80-87294-99-4.

2020

SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY plus YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. Surface and Coatings Technology, 2020, roč. 384, č. 125328, s. 1-13. ISSN: 0257-8972.

SUK, L.; PETROSYAN, T.; ŠTEVANKA, K.; VLČEK, D.; GEJDOŠ, P. Experimental Investigation of Critical Heat Flux on Different Surfaces at Low Pressure and Low Flow. ENERGIES, 2020, roč. 13, č. 19, s. 1-23. ISSN: 1996-1073.

GEJDOŠ, P.; JULIŠ, M.; KLAKURKOVÁ, L. Metallographic Analysis of Stainless Steel Inner Shaft of Centrifugal Pump. In Metallography & Fractography 2019. Defect and Diffusion Forum. Switzerland: Trans Tech Publications Ltd, 2020. s. 223-228. ISSN: 1662-9507.

CASAS LUNA, M.; RAVASZOVÁ, S.; SKALKA, P.; GEJDOŠ, P.; JECH, D.; SLÁMEČKA, K.; KAISER, J.; DVOŘÁK, K.; ČELKO, L. Thermal cycling effect on the phase stability and fracture resistance of synthetic barium/magnesium aluminosilicate systems. Ceramics International, 2020, roč. 46, č. 15, s. 24129-24136. ISSN: 0272-8842.

SLÁMEČKA, K.; JECH, D.; KLAKURKOVÁ, L.; TKACHENKO, S.; REMEŠOVÁ, M.; GEJDOŠ, P.; ČELKO, L. Thermal cycling behaviour of plasma-sprayed thermal barrier coatings with pre-oxidized NiCrAlY and NiCoCrAlY bond-coats. In MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE. Procedia Structural Integrity. Nizozemsko: Elsevier, 2020. s. 439-444. ISBN: 978-80-214-5760-7. ISSN: 2452-3216.

2019

DYČKA, M.; DYČKOVÁ, L.; GEJDOŠ, P.; JULIŠ, M. Microstructural study of AZ91C magnesium alloy castings produced by investment casting in as-cast state and after heat treatment. In Metal 2019. 1. Ostrava: Tanger Ltd., 2019. s. 1457-1462. ISBN: 978-80-87294-92-5.

RUDOLF, P.; JULIŠ, M.; KLAKURKOVÁ, L.; GEJDOŠ, P.; HUDEC, M. Cavitation erosion testing of different cavitation-resistent materials and coatings using the cavitating jet method. In IOP Conf. Series: Earth and Environmental Science. IOP Conference Series: Earth and Environmental Science. Spojené království Velké Británie a Severního Irska: IOP Publishing, 2019. s. 1-10. ISSN: 1755-1307.

2018

ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; CHRÁSKA, T.; JECH, D.; GEJDOŠ, P. Low cycle fatigue performance of Ni-based superalloy coated with complex thermal barrier coating. MATERIALS CHARACTERIZATION, 2018, č. 139, s. 347-354. ISSN: 1044-5803.

ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P.; JECH, D. High-Temperature Low-Cycle Fatigue Behaviour of MAR-M247 Coated with Newly Developed Thermal and Environmental Barrier Coating. Advances in Materials Science and Engineering, 2018, roč. 2018, č. 1, s. 1-8. ISSN: 1687-8434.

2017

OBRTLÍK, K.; ČELKO, L.; CHRÁSKA, T.; ŠULÁK, I.; GEJDOŠ, P. Effect of alumina-silica-zirconia eutectic ceramic thermal barrier coating on the low cycle fatigue behaviour of cast polycrystalline nickel-based superalloy at 900 °C. Surface and Coatings Technology, 2017, roč. 318, č. 1, s. 374-381. ISSN: 0257-8972.

CASAS LUNA, M.; TKACHENKO, S.; HORYNOVÁ, M.; KLAKURKOVÁ, L.; GEJDOŠ, P.; DÍAZ DE LA TORRE, S.; ČELKO, L.; KAISER, J.; MONTUFAR JIMENEZ, E. Interpenetrated Magnesium–Tricalcium Phosphate Composite: Manufacture, Characterization and In Vitro Degradation Test. Acta Metallurgica Sinica (English Letters), 2017, roč. 30, č. 4, s. 319-325. ISSN: 1006-7191.

KLAKURKOVÁ, L.; HORYNOVÁ, M.; JULIŠ, M.; GEJDOŠ, P.; SKALKA, P.; REMEŠOVÁ, M.; ČELKO, L. Failure analysis of massively failed compressed air cartridge. ENGINEERING FAILURE ANALYSIS, 2017, č. 82, s. 776-782. ISSN: 1350-6307.

CASAS LUNA, M.; MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; GEJDOŠ, P.; KLAKURKOVÁ, L.; DÍAZ DE LA TORRE, S.; KAISER, J.; ČELKO, L. Tricalcium Phosphate - Magnesium Interface: Microstructure and Properties. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. s. 412-415. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.

ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P. Degradation of YSZ/EUCOR TBC Coating System during High Temperature Low Cycle Fatigue Tests. In Materials Structure & Micromechanics of Fracture VIII. Solid State Phenomena. Solid State Phenomena. Switzerland: Trans Tech Publications, 2017. s. 420-423. ISBN: 978-3-03835-626-4. ISSN: 1012-0394.

2016

ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P. High Temperature Degradation of YSZ/ EUCOR TBC Coating System during Low Cycle Fatigue Tests. Materials Structure & Micromechanics of Fracture. 1. Brno, Czech Republic: Brno University of Technology, 2016. s. 219-219. ISBN: 978-80-214-5357-9.

CASAS LUNA, M.; MONTUFAR JIMENEZ, E.; HORYNOVÁ, M.; GEJDOŠ, P.; KLAKURKOVÁ, L.; DÍAZ DE LA TORRE, S.; KAISER, J.; ČELKO, L. Structure and Properties of Calcium Phosphate - Magnesium Interface Processed by Spark Plasma Sintering. Materials Structure & Micromechanics of Fracture. Brno, Czech Republic: Brno University of Technology, 2016. s. 196-196. ISBN: 978-80-214-5357-9.

GEJDOŠ, P.; KLAKURKOVÁ, L.; JULIŠ, M.; HORYNOVÁ, M.; REMEŠOVÁ, M.; HÉGR, E. Analysis of Surface Layer Defects on Carburezed Steel Component after Alkaline Blackening. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. s. 92-92. ISBN: 978-80-553-2547-7.

HORYNOVÁ, M.; KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; ČELKO, L. Influence of Microstructural parameters on the Corrosion Resistance of Aluminium Alloy BS L170. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. s. 98-98. ISBN: 978-80-553-2547-7.

KLAKURKOVÁ, L.; JULIŠ, M.; GEJDOŠ, P.; HORYNOVÁ, M. The Use of Microstructural Analysis for the Evaluation of Quality of Double- Wall Pipes. Metallography ´ 16. Košice: Faculty of Metallurgy Technical University of Košice, 2016. s. 91-91. ISBN: 978-80-553-2547-7.

2015

JULIŠ, M.; KLAKURKOVÁ, L.; GEJDOŠ, P.; HORYNOVÁ, M.; HÉGR, E.;SYTAŘ, P. Methods and techniques of samples preparation for assessment of layers after chemical and heat treatment. In Conference on Chemical Heat Treatment of Metal Surfaces. Čerčany, Czech Republic: Asociace pro tepelné zpracování kovů ECOSOND s. r. o., 2015. s. 96-101. ISBN: 978-80-904462-8-1.

ŠULÁK, I.; OBRTLÍK, K.; ČELKO, L.; GEJDOŠ, P. EFFECT OF GRIT BLASTING SURFACE TREATMENT ON HIGH TEMPERATURE LOW, CYCLE FATIGUE LIFE OF INCONEL 713LC. In Multi Scale Design of Advanced Materials. Brno: 2015. s. 139-144. ISBN: 978-80-214-5146-9.

HORYNOVÁ, M.; DOLEŽAL, P.; ZAPLETAL, J.; GEJDOŠ, P.; PODRÁBSKÝ, T. Influence of aluminium content on corrosion behavior of AZ type magnesium alloy. In MULTI-SCALE DESIGN OF ADVANCEDMATERIALS- CONFERENCE PROCEEDINGS. 2015. s. 42-47. ISBN: 978-80-214-5146-9.

Edgar Benjamin Montufar, PhD.

Responsible for Materials for Additive Manufacturing

Researcher

Research ID: F-8040-2016

Publication activity:

Publications in scientific journals: 61
Books chapters: 6
Books: 2
Patents: 2
Utility models: 1
Citations WOS: +2200
h-Index WOS: 22
Editorial board in scientific journals: 1

The most significant publications :

2024

R.L.M.S. Oliveira, E. Antoneli, E.B. Montufar, E. de S. Trichês. Cold sintering of β-tricalcium phosphate/bioactive glass composites. Ceramics International 2024, 50, 18138–18145.
S. Tkachenko, C. Oliver-Urrutia, O. Ksenzova, K. Slámečka, V. Bednaříková, M. Remešová, M. Baláž, A. Deák, E.B. Montufar, L. Čelko. Production of spherical Mo and Mo-Si powders by spray drying of Si suspension in a water-soluble Mo precursor. Advanced Powder Technology 2024, 35, 104313.

2023

S. Tkachenko, K. Slámečka, C. Oliver-Urrutia, O. Ksenzova, V. Bednaříková, M. Remešová, K. Dvořák, M. Baláž, A. Deák, M. Kachlík, L. Čelko, E.B. Montufar. Effect of powder milling on sintering behavior and monotonic and cyclic mechanical properties of Mo and Mo–Si lattices produced by direct ink writing. Journal of Materials Research and Technology 2023, 27, 2475–2489.
H. Sopha, A. Kashimbetova, M. Baudys, P. Kumar Chennam, M. Sepúlveda, J. Rusek, L. Celko, E.B. Montufar, J. Krysa, J.M. Macak. Flow-through gas phase photocatalysis using TiO2 nanotubes on wirelessly anodized 3D-printed TiNb meshes. Nano Letters 2023, 23, 6406–6413.
M. Espanol, E. Davis, E. Meslet, G. Mestres, E.B. Montufar, M.P. Ginebra. Effect of moisture on the reactivity of alpha-tricalcium phosphate. Ceramics International 2023, 49, 18228-18237.
A. Kashimbetova, K. Slámečka, S. Díaz-de-la-Torre, J.C. Méndez-García, B. Hernández-Morales, M.C. Piña-Barba, D. Hui, L. Celko, E.B. Montufar. Pressure-less spark plasma sintering of 3D-plotted titanium porous structures. Journal of Materials Research and Technology 2023, 22, 2147-2157.
K. Slámečka, A. Kashimbetova, J. Pokluda, T. Zikmund, J. Kaiser, E.B. Montufar, L. Čelko. Fatigue behaviour of titanium scaffolds with hierarchical porosity produced by material extrusion additive manufacturing. Materials and Design 2023, 225, 111453.
C. Oliver-Urrutia, A. Kashimbetova, K. Slámečka, L. Čelko, E.B. Montufar. Robocasting additive manufacturing of titanium and titanium alloys: a review. Transactions of the Indian Institute of Metals 2023, 76, 389-402.

2022

Casas-Luna, E.B. Montufar, N. Hort, S. Díaz-de-la-Torre, J.C. Méndez-García, L. Vištejnová, A. Brínek, A. Daňhel, K. Dvořak, J. Kaiser, L. Čelko. Degradable magnesium-hydroxyapatite interpenetrating phase composites processed by current assisted metal infiltration in additive-manufactured porous preforms. Journal of Magnesium and Alloys 2022, 10, 3641-3656.
Hympanova, C. Oliver-Urrutia, M. Vojta, M. Macháček, P. Krupka, R. Kukla, L. Čelko, E.B. Montufar, J. Marek. Assessment of Streptococcus mutans biofilm formation on calcium phosphate ceramics: The role of crystalline composition and microstructure. Biomaterials Advances 2022, 135, 212750
Kashimbetova, K. Slámečka, M. Casas-Luna, C. Oliver-Urrutia, S. Ravaszová, K. Dvořák, L. Čelko, E.B. Montufar. Implications of unconventional setting conditions on the mechanical strength of synthetic bone grafts produced with self-hardening calcium phosphate pastes. Ceramics International 2022, 48, 6225–6235.

2021

L. Čelko, V. Guriérrez-Cano, M. Casas-Luna, J. Matula, C. Oliver-Urrutia, M. Remešová, K. Dvořák, T. Zikmund, J. Kaiser, E.B. Montufar. Characterization of porosity and hollow defects in ceramic objects built by extrusion additive manufacturing. Additive Manufacturing 2021, 47, 102272.
H. Sopha, A. Kashimbetova, L. Hromadko, I. Saldan, L. Celko, E.B. Montufar, J.M. Macak. Anodic TiO2 nanotubes on 3D-printed titanium meshes for photocatalytic applications. Nano Letters 2021, 21, 8701−8706.
C. Oliver-Urrutia, R. Rosales Ibañez, M.V. Flores-Merino, L. Vojtova, J. Salplachta, L. Čelko, J. Kaiser, E.B. Montufar. Lyophilized polyvinylpyrrolidone hydrogel for culture of human oral mucosa stem cells. Materials 2021, 14, 227.
A.M. Carranza-Trejo, V. Vetvicka, L. Vistejnova, M. Kralickova, E.B. Montufar. Hepatocyte and immune cell crosstalk in non-alcoholic fatty liver disease. Expert Review of Gastroenterology & Hepatology 2021, 15, 783-796.

2020

E.B. Montufar, S. Tkachenko, M. Casas-Luna, P. Škarvada, K. Slámečka, S. Diaz-de-la-Torre, D. Koutný, D. Paloušek, Z. Koledová, L.G. Hernández-Tapia, T. Zikmund, L. Čelko, J. Kaiser. Benchmarking of additive manufacturing technologies for commercial-pure-titanium bone-tissue-engineering scaffolds: processing-microstructure-property relationship. Additive Manufacturing 2020, 36, 101516.
E.B. Montufar, K. Slámečka, M. Casas-Luna, P. Skalka, E. Ramírez-Cedillo, M. Zbončák, J. Kaiser, L. Čelko. Factors governing the dimensional accuracy and fracture modes under compression of regular and shifted orthogonal scaffolds. Journal of the European Ceramic Society 2020, 40, 4923-4931.
L.G. Hernández-Tapia, Z. Fohlerová, J. Žídek, M.A. Alvarez-Perez, L. Čelko, J. Kaiser, E.B. Montufar. Effects of cryopreservation on cell metabolic activity and function of biofabricated structures laden with osteoblasts. Materials 2020, 13, 1966.
M. Casas-Luna, J.A. Torres-Rodríguez, O.U. Valdés-Martínez, N. Obradović, K. Slámečka, K. Maca, J. Kaiser, E.B. Montufar, L. Čelko. Robocasting of controlled porous CaSiO3–SiO2 structures: Architecture – Strength relationship and material catalytic behavior. Ceramics International 2020, 46, 8853-8861.

2019

M. Casas-Luna, H. Tan, S. Tkachenko, D. Salamon, E.B. Montufar. Enhancement of mechanical properties of 3D-plotted tricalcium phosphate scaffolds by rapid sintering. Journal of the European Ceramic Society 2019, 39, 4366–4374.
P. Skalka, K. Slámečka, E.B. Montufar, L. Čelko. Estimation of the effective elastic constants of bone scaffolds fabricated by direct ink writing. Journal of the European Ceramic Society 2019, 39: 1586-1594.
G. Mestres, M.A. Fernandez-Yague, D. Pastorino, E.B. Montufar, C. Canal, M.C. Manzanares-Céspedes, M.P. Ginebra. In vivo efficiency of antimicrobial inorganic bone grafts in osteomyelitis treatments. Materials Science and Engineering C 2019, 97: 84–95.

2018

I. Ročňáková, K. Slámečka, E.B. Montufar, M. Remešová, L. Dyčková, A. Břínek, D. Jech, K Dvořák, L. Čelko, J. Kaiser. Deposition of hydroxyapatite and tricalcium phosphate coatings by suspension plasma spraying: effects of torch speed. Journal of the European Ceramic Society 2018, 38: 5489-5496.
E.B. Montufar, M. Casas-Luna, M. Horynová, S. Tkachenko, Z. Fohlerová, S. Diaz-de-la-Torre, K. Dvorak, L. Celko, J. Kaiser. High strength, biodegradable and cytocompatible alpha tricalcium phosphate-iron composites for temporal reduction of bone fractures. Acta Biomaterialia 2018, 70: 293–303.
S. Raymond, Y. Maazouz, E.B. Montufar, R.A. Perez, B. González, J. Konka, J. Kaiser, M.P. Ginebra. Accelerated hardening of nanotextured 3D-plotted self-setting calcium phosphate inks. Acta Biomaterialia 2018, 75: 451–462.
A. Barba, Y. Maazouz, A. Diez-Escudero, K. Rappe, M. Espanol, E.B. Montufar, C. Öhman-Mägi, C. Persson, P. Fontecha, M.C. Manzanares, J. Franch, M.P. Ginebra. Osteogenesis by foamed and 3D-printed nanostructured calcium phosphate scaffolds: Effect of pore architecture. Acta Biomaterialia 2018, 79: 135-147.

2017

Y. Maazouz, E.B. Montufar, J. Malbert, M. Espanol, M.P. Ginebra. Self-hardening and thermoresponsive alpha tricalcium phosphate/pluronic pastes. Acta Biomaterialia 2017, 49: 563-574.
R. O’Neill, H.O. McCarthy, E.B. Montufar, M.P. Ginebra, D.I. Wilson, A. Lennon, N. Dunne. Critical review: Injectability of calcium phosphate pastes and cements. Acta Biomaterialia 2017, 50: 1-19.
G. Ciapetti, G. Di Pompo, S. Avnet, D. Martini, A. Diez-Escudero, E.B. Montufar, M.P. Ginebra, N. Baldini. Osteoclast differentiation from human blood precursors on biomimetic calcium-phosphate substrates. Acta Biomaterialia 2017, 50: 102-113.
A. Barba, A. Diez-Escudero, Y. Maazouz, K. Rappe, M. Espanol, E.B. Montufar, M. Bonany, J.M. Sadowska, J. Guillem-Marti, C. Öhman-Mägi, C. Persson, M.C. Manzanares, J. Franch, M.P. Ginebra. Osteoinduction by foamed and 3D-printed calcium phosphate scaffolds: effect of nanostructure and pore architecture. ACS Appl. Mater. Interfaces 2017, 9: 41722–41736.

2016

I. Ročňáková, E.B. Montufar, M. Horynová, T. Zikmund, K. Novotný, L. Klakurková, L. Celko, G.L. Song, J. Kaiser. Assessment of localized corrosion under simulated physiological conditions of magnesium samples with heterogeneous microstructure: value of X-ray computed micro-tomography platform. Corrosion Sciences 2016, 104: 187-196.
E.B. Montufar, M. Horynová, M. Casas-Luna, S. Diaz-de-la-Torre, L. Celko, L. Klakurková, Z. Spotz, G. Diéguez-Trejo, Z. Fohlerová, K. Dvorak, T. Zikmund, J. Kaiser. Spark plasma sintering of load-bearing iron-carbon nanotube-tricalcium phosphate CerMets for orthopaedic applications. JOM 2016, 68: 1134-1142.
J. Engstrand, E.B. Montufar, H. Engqvist, M.P. Ginebra, C. Persson. Brushite foams - the effect of Tween® 80 and Pluronic® F-127 on foam porosity and mechanical properties. J Biomed Mater Res Part B 2016, 104B: 67–77.
R. O’Neill, H.O. McCarthy, E. Cunningham, E.B. Montufar, M.P. Ginebra, D.I. Wilson, A. Lennon, N. Dunne. Extent and mechanism of phase separation during the extrusion of calcium phosphate pastes. J Mater Sci: Mater Med 2016, 27: 29.

≤2015

Kovtun, M.J. Goeckelmann, A.A. Niclas, E.B. Montufar, M.P. Ginebra, J.A. Planell, M. Santin, A. Ignatius. In vivo performance of novel soybean/gelatin-based bioactive and injectable hydroxyapatite foams. Acta Biomaterialia 2015, 12: 242-249.
Maazouz, E.B. Montufar, J. Guillem-Marti, I. Fleps, C. Ohman, C. Persson, M.P. Ginebra. Robocasting of biomimetic hydroxyapatite scaffolds using self-setting inks. Journal of Materials Chemistry B 2014, 2: 5378-5386.
E.B. Montufar, Y. Maazouz, M.P. Ginebra. Relevance of the setting reaction to the injectability of tricalcium phosphate pastes. Acta Biomaterialia 2013; 9: 6188-6198.
M.P. Ginebra, C. Canal, M. Espanol, D. Pastorino, E.B. Montufar. Calcium phosphate cements as drug delivery materials. Advanced Drug Delivery Reviews 2012; 64: 1090–1110.
E.B. Montufar, T. Traykova, J.A. Planell, M.P. Ginebra. Comparison of a low molecular weight and a macromolecular surfactant as foamingagents for injectable self setting hydroxyapatite foams: Polysorbate 80 versus gelatin. Materials Science and Engineering C 2011; 31: 1498-1504.
Perut, E.B. Montufar, G. Ciapetti, M. Santin, J. Salvage, T. Traykova, J.A. Planell, M.P. Ginebra, N. Baldini. Novel soybean/gelatine-based bioactive and injectable hydroxyapatite foam: material properties and cell response. Acta Biomaterialia 2011; 7: 1780-1787.
E.B. Montufar, T. Traykova, C. Gil, I. Harr, A. Almirall, A. Aguirre, E. Engel, J.A. Planell, M.P. Ginebra. Foamed surfactant solution as a template for self-setting injectable hydroxyapatite scaffolds for bone regeneration. Acta Biomaterialia 2010; 6: 876-885.
M.P. Ginebra, M. Espanol, E.B. Montufar, R.A. Perez, G. Mestres. New processing approaches in calcium phosphate cements and their applications in regenerative medicine. Acta Biomaterialia 2010; 6: 2863-2873.
E.B. Montufar, T. Traykova, E. Schacht, L. Ambrosio, M. Santin, J.A. Planell, M.P. Ginebra. Self-hardening calcium deficient hydroxyapatite/gelatine foams for bone regeneration. J Mater Sci: Mater Med 2010; 21: 863-869.
M. Espanol, R.A. Perez, E.B. Montufar, C. Marichal, A. Sacco, M.P. Ginebra. Intrinsic porosity of calcium phosphate cements and its significance for drug delivery and tissue engineering applications. Acta Biomaterialia 2009; 5:2752-2762.

Education and academic qualification

2010, PhD in Biomedical Engineering, School of Industrial Engineering of Barcelona, Technical University of Catalonia (UPC), Spain.

2005, Master in Materials Science and Engineering, Institute for Materials Research, Universidad Nacional Autónoma de México (UNAM), Mexico.

2003, Engineer degree in Chemical Metallurgy, Faculty of Chemistry, Universidad Nacional Autónoma de México (UNAM), Mexico

Professional experience

2015 – at present: Senior researcher, CEITEC - Central European Institute of Technology, Brno University of Technology, Czech Republic.

2010 – 2014: Assistant professor, Department of Material Science and Metallurgical Engineering,

Technical University of Catalonia (UPC), Spain.

2013 – 2014: Assistant researcher, Centre for Innovation and Technology, Technical University of

Catalonia (UPC), Spain.

2010 – 2012: Assistant researcher, Institute for Bioengineering of Catalonia (IBEC), Spain.

Fellowships, Awards, and distinctions

2021 Prominent Mexican, distinction awarded by the government of Mexico recognizes Mexican nationals for their outstanding professional achievements abroad.

2016 Marie Sklodowska-Curie Fellow of the EU Horizon 2020 program, co-financed by the South Moravian Region, Czech Republic (665860).

2014 – at present Member of the Mexican National System of Researchers, Level II of III, distinction granted by National Council for Science and Technology (CONACYT), Mexico.

2012 Doctoral award for industrial engineering, Award received from Technical University of Catalonia (UPC), Spain.

2011 European Biomaterials and Tissue Engineering Doctoral Award (EDA), award received from the European Society for Biomaterials (ESB), Ireland.

Research internships

2024 Lithoz, ceramic additive manufacturing company, Vienna-Austria.

2015 and 2017 Centre for Research and Technological Innovation, National Technical Institute, Mexico.

2010 Faculty of Medicine, Technion Institute of Technology, Haifa-Israel.

2008 Pathophysiology laboratory, Rizzoli Orthopedic Institute, Bologna-Italy.

2007 Institute of orthopedic and biomechanics research, University of Ulm, Ulm-Germany.

Other activities

President of the Czech chapter of the Global Network MX

Member of the editorial board of the journal Reviews on Advanced Materials Science

Reviewer in more than 10 international scientific journals in the category Biomaterials

Member of scientific committee of the International Congress of the Mexican Network for Biomaterials and Tissue Engineering (Red BIOT)

Michaela Remešová, PhD.

Researcher, High-Performance Materials and Coatings for Industry Research Group

Researcher

Research ID: AAA-8935-2021

Publication activity:

publications in scientific journals (WOS): 18
publications in scientific journals (Scopus): 40
citations (WOS) 140
h-Index (WOS): 7
utility models: 1

The most significant publications :

2024

Kováčová, M., Bodnár Yankovych, H., Augustyniak, A., Casas-Luna, M., Remešová, M., Findoráková, L., Stahorský, M., Čelko, L., Baláž, M. Triggering antibacterial activity of a common plant by biosorption of selected heavy metals. Journal of Biological Inorganic Chemistry, 29 (2024) 201-216, https://doi.org/10.1007/s00775-024-02045-1

2023

Tkachenko, S., Bednaříková, V., Ksenzova, O., Remešová, M., Slámečka, K., Cihlář, J., Baláž, M., Deák, A., Čelko, L. Microstructure and reduction behavior of Mo powders doped with La2O3 and ZrO2 oxides using the spray drying method. Journal of Alloys and Compounds, 964 (2023) 171307, https://doi.org/10.1016/j.jallcom.2023.171307

Tkachenko, S., Slámečka, K., Oliver-Urrutia, C., Ksenzova, O., Bednaříková, V., Remešová, M., Dvořák, K., Baláž, M., Deák, A., Kachlík, M., Čelko, L., Montúfar, E.B. Effect of powder milling on sintering behavior and monotonic and cyclic mechanical properties of Mo and Mo-Si lattices produced by direct ink writing. Journal of Materials Research and Technology, 27 (2023) 2475-2489, https://doi.org/10.1016/j.jmrt.2023.10.002

Deák, A., Szabó, P.T., Bednaříková, V., Cihlář, J., Demeter, A., Remešová, M., Colacino, E., Čelko, L. The first solid-state route to luminescent Au(I)—glutathionate and its pH-controlled transformation into ultrasmall oligomeric Au10–12(SG)10–12 nanoclusters for application in cancer radiotheraphy. Frontiers in Chemistry, 11 (2023), https://doi.org/10.3389/fchem.2023.1178225

2022

Čelko, L., Tkachenko, S., Casas Luna, M., Dyčková, L., Bednaříková, V., Remešová, M., Komarov, P., Deák, A., Baláž, M., Crawford, D., Díaz de la Torre, S., Bodoki, E., Cihlář, J. High-energy ball milling and spark plasma sintering of molybdenum - lanthanum oxide (Mo-La2O3) and molybdenum - lanthanum zirconate (Mo-La2Zr2O7) composite powders. International Journal of Refractory Metals & Hard Materials, 102 (2022) 105717, https://doi.org/10.1016/j.ijrmhm.2021.105717

Trajic, J., Curcic, M., Casas Luna, M., Romcevic, M., Remesova, M., Balaz, M., Celko, L., Dvorak, K., Romcevic, N. Vibrational properties of the mechanochemically synthesized Cu2SnS3: Raman study. Journal of Raman Spectroscopy, 53 (2022) 977-987, https://doi.org/10.1002/jrs.6318

2021

Čelko, L., Gutiérrez Cano, V., Casas Luna, M., Matula, J., Oliver Urrutia, C., Remešová, M., Dvořák, K., Zikmund, T., Kaiser, J., Montúfar, E.B. Characterization of porosity and hollow defects in ceramic objects built by extrusion additive manufacturing. Additive Manufacturing, 47 (2021) 102272, https://doi.org/10.1016/j.addma.2021.102272

Suchý, J., Klakurková, L., Man, O., Remešová, M., Horynová, M., Paloušek, D., Koutný, D., Krištofová, P., Vojtěch, D., Čelko L. Corrosion behaviour of WE43 magnesium alloy printed using selective laser melting in simulation body fluid solution. Journal of Manufacturing Processes, 69 (2021) 556-566, https://doi.org/10.1016/j.jmapro.2021.08.006

2020

Remešová, M., Tkachenko, S., Kvarda, D., Ročňáková, I., Gollas, B., Menelaou, M., Čelko, L., Kaiser, J. Effects of anodizing conditions and the addition of Al2O3/PTFE particles on the microstructure and the mechanical properties of porous anodic coatings on the AA1050 aluminium alloy. Applied Surface Science, 513 (2020) 145780, https://doi.org/10.1016/j.apsusc.2020.145780

Slámečka, K., Jech, D., Klakurková, L., Tkachenko, S., Remešová, M., Gejdoš, P., Čelko, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY + YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. Surface and Coatings Technology, 384 (2020) 125328, https://doi.org/10.1016/j.surfcoat.2019.125328

Páleníček, M., Papula, M., Remešová, M., Jech, D., Ročňáková, I., Čelko, L. Anodizing of Pure Magnesium in Sodium Hydroxide Electrolyte Solution. Defect and Diffusion Forum, 405 (2020) 440-444, https://doi.org/10.4028/www.scientific.net/DDF.405.440

2019

Čelko, L., Menelaou, M., Casas Luna, M., Horynová, M., Musálek, T., Remešová, M., Díaz de la Torre, S., Morsi, K., Kaiser, J. Spark plasma extrusion and the thermal barrier concept. Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 50 (2019) 656-665, https://doi.org/10.1007/s11663-018-1493-3

Horynová, M., Remešová, M., Klakurková, L., Dvořák, K., Ročňáková, I., Yan, S., Čelko, L., Song, G.L. Design of tailored biodegradable implants: The effect of voltage on electrodeposited calcium phosphate Coatings on pure magnesium. Journal of the American Ceramic Society, 102 (2019) 123-135, https://doi.org/10.1111/jace.15888

2018

Ročňáková, I., Slámečka, K., Montúfar, E.B., Remešová, M., Dyčková, L., Břínek, A., Jech, D., Dvořák, K., Čelko, L., Kaiser, J. Deposition of hydroxyapatite and tricalcium phosphate coatings by suspension plasma spraying: Effects of torch speed. Journal of the European Ceramic Society, 38 (2018) 5489-5496, https://doi.org/10.1016/j.jeurceramsoc.2018.08.007

2017

Klakurková, L., Horynová, M., Juliš, M., Gejdoš, P., Skalka, P., Remešová, M., Čelko, L. Failure analysis of massively failed compressed air cartridge. Engineering Failure Analysis, 82 (2017) 776-782, https://doi.org/10.1016/j.engfailanal.2017.07.016

Sládková, L., Prochazka, D., Pořízka, P., Škarková, P., Remešová, M., Hrdlička, A., Novotný, K., Čelko, L., Kaiser, J. Improvement of the Laser-Induced Breakdown Spectroscopy method sensitivity by the usage of combination of Ag-nanoparticles and vacuum conditions. Spectrochimica Acta Part B: Atomic Spectroscopy, 127 (2017) 48-55, https://doi.org/10.1016/j.sab.2016.11.005

Remešová, M., Klakurková, L., Čelko, L., Sládková, L., Jech, D., Kaiser, J. Anodizing of Zinc-Titanium Alloy in NaOH and KOH Baths. Solid State Phenomena, 258 (2016) 399-402, https://doi.org/10.4028/www.scientific.net/SSP.258.399

Remešová, M., Klakurková, L., Horynová, M., Čelko, L., Kaiser, J. Preparation of Metallographic Samples with Anodic Layers. Materials Science Forum, 891 (2017) 106-110, https://doi.org/10.4028/www.scientific.net/MSF.891.106

Assoc. Prof. Ladislav Čelko, PhD.

Head of the Research Group – High-Performance Materials and Coatings for Industry

Researcher

Research ID: D-6870-2012

Scientific background:

Chemical and mechanochemical synthesis of inorganic-organic and metal oxides powders
Processing of advanced coatings by the means of thermal spray technologies
Non-ferrous metals, intermetallics and ceramics for high temperature applications
Non-destructive and destructive methods for materials structural and phase characterization
Design and construction of manufacturing and materials testing technologies

International projects:

HORIZON EUROPE, WIDERA-2022-TALENTS-03, Cultivating leaders for innovative coatings and additive manufacturing applications, 9/2023 – 8/2027
NATO 2020, Science for Peace and Security, Light-weight 600 °C solid oxide fuel cells for energy security, 2/2022 – 10/2024
HORIZON 2020, MSCA-ITN-2019, Magnetoelectrics beyond 2020: A training programme on energy-efficient magnetoelectric nanomaterials for advanced information and healthcare technologies, 9/2019 – 8/2023

National projects:

TACR Project, High-temperature annealing furnace for SiC semiconductor substrates, 2024 – 2025
MEYES Project, New materials for emerging energy technologies, 2020 – 2023
MoIT Project, Research and development in modification of abrasive media geometry for progressive grinding, 2019 - 2021
MoIT Project, Combined plasma source technology for processing of advanced coatings, 2016 - 2019
MoIT Project, Research and development of coatings from abradable materials for turboprop engine thermodynamic efficiency improvement, 2016 – 2018
GACR Project, Plasma deposition, microstructural and thermo-mechanical stability of environmental barrier coatings, 2015 – 2017
TACR Project, Research center of surface treatment, 2014 – 2019
TACR Project, Research into and development of high-speed surface machining technology for hard-surface coatings prepared by thermal spraying, 2013 – 2015
GACR Project, Processing of intermetallic layered structures and hypereutectic aluminium-based alloys using sacrificial nickel coatings, 2012 – 2014
more than other 20 national projects in the fields of materials science and surface engineering

Publication activity:

chapters in monographs: 1
publications in scientific journals: +110
contributed lectures at conferences: +30
invited lectures: 4
citations: +900
h-Index: 17
patents: 4
utility models: 4
editor of journals: 2

The most significant publications:

2023

Sopha, H., Kashimbetova, A., Baudys, M., Chennam, P., Sepúlveda, L., Rusek, J., Kolíbalová, E., Čelko, L., Krýsa, J., Macák, J. Flow-through gas phase photocatalysis using TiO₂ nanotubes on wirelessly anodized 3D-printed TiNb meshes. Nano Letters, 23 (2023) 6406-6413, https://doi.org/10.1021/acs.nanolett.3c01149
Tkachenko, S., Bednaříková, V., Ksenzova, O., Remešová, M., Slámečka, K., Cihlář, J., Baláž, M., Deák, A., Čelko, L. Microstructure and reduction behavior of Mo powders doped with La₂O₃ and ZrO₂ oxides using the spray drying method. Journal of Alloys and Compounds, 964 (2023) 171307, https://doi.org/10.1016/j.jallcom.2023.171307
Tkachenko, S., Slámečka, K., Oliver-Urrutia, C., Ksenzova, O., Bednaříková, V., Remešová, M., Dvořák, K., Baláž, M., Deák, A., Kachlík, M., Čelko, L., Montúfar, E.B. Effect of powder milling on sintering behavior and monotonic and cyclic mechanical properties of Mo and Mo-Si lattices produced by direct ink writing. Journal of Materials Research and Technology, 27 (2023) 2475-2489, https://doi.org/10.1016/j.jmrt.2023.10.002
Slámečka, K., Kashimbetova, A., Pokluda, J., Zikmund, T., Kaiser, J., Montúfar, E.B., Čelko, L. Fatigue behaviour of titanium scaffolds with hierarchical porosity produced by material extrusion additive manufacturing. Materials & Design, 225 (2023) 111453, https://doi.org/10.1016/j.matdes.2022.111453
Pradhan, G., Celegato, F., Madri, A., Coisson, M.; Barrera, G., Mikuličková, L., Arregi-Uribeetxebarria, J., Čelko, L., Uhlíř, V., Rizzi, P., Tiberto, P. Control of magnetic vortex states in FeGa microdisks: Experiments and micromagnetics. Journal of Science Advanced Materials and Devices, 8 (2023) 100608, https://doi.org/10.1016/j.jsamd.2023.100608

2022

Casas Luna, M., Montúfar, E.B., Hort, N., Díaz de la Torre, S., Mendez Garcia, J., Vištejnová, L., Břínek, A., Daňhel, A., Dvořák, K., Kaiser, J.; Čelko, L. Degradable magnesium-hydroxyapatite interpenetrating phase composites processed by current assisted metal infiltration in additive-manufactured porous preforms. Journal of Magnesium and Alloys, 10 (2022) 3641-3656, https://doi.org/10.1016/j.jma.2022.07.019
Čelko, L., Tkachenko, S., Casas Luna, M., Dyčková, L., Bednaříková, V., Remešová, M., Komarov, P., Deák, A., Baláž, M., Crawford, D., Díaz de la Torre, S., Bodoki, E., Cihlář, J. High-energy ball milling and spark plasma sintering of molybdenum - lanthanum oxide (Mo-La₂O₃) and molybdenum - lanthanum zirconate (Mo-La₂Zr₂O₇) composite powders. International Journal of Refractory Metals & Hard Materials, 102 (2022) 105717, https://doi.org/10.1016/j.ijrmhm.2021.105717
Tkachenko, S., Brodnikovskyi, D., Čížek, J., Komarov, P., Brodnikovskyi, Y., Tymoshenko, Y., Csáki, Š., Pinchuk, M., Vasylyev, O., Čelko, L., Gadzyra, M., Chráska, T. Novel Ti-Si-C composites for SOFC interconnect materials: Production optimization. Ceramics International, 48 (2022) 27785-27798, https://doi.org/10.1016/j.ceramint.2022.06.081
Díaz de la Torre, S., Munoz Juarez, I., Mendez Garcia, J., Gonzalez Corral, G., Casas Luna, M., Montúfar, E.B., Oliver Urrutia, C., Pina Barba, M., Čelko, L. Spark plasma extrusion of binder free hydroxyapatite powder. Nanotechnology Reviews, 11 (2022) 2295-2303, https://doi.org/10.1515/ntrev-2022-0131
Kashimbetova, A., Slámečka, K., Díaz de la Torre, S., Hernández Morales, B., Mendez Garcia, J., Pina Barba, M., Hui, D., Čelko, L.; Montúfar, E.B. Pressure-less spark plasma sintering of 3D-plotted titanium porous structures. Journal of Materials Research and Technology, 22 (2022) 2147-2157, https://doi.org/10.1016/j.jmrt.2022.12.072

2021

Sopha, H., Kashimbetova, A., Hromádko, L., Saldan, I., Čelko, L., Montúfar, E.B., Macák, J. Anodic TiO₂ nanotubes on 3D-printed titanium meshes for photocatalytic applications. Nano Letters, 21 (2021) 8701-8706, https://doi.org/10.1021/acs.nanolett.1c02815
Čelko, L., Gutiérrez Cano, V., Casas Luna, M., Matula, J., Oliver Urrutia, C., Remešová, M., Dvořák, K., Zikmund, T., Kaiser, J., Montúfar, E.B. Characterization of porosity and hollow defects in ceramic objects built by extrusion additive manufacturing. Additive Manufacturing, 47 (2021) 102272, https://doi.org/10.1016/j.addma.2021.102272
Komarov, P., Jech, D., Tkachenko, S., Slámečka, K., Dvořák, K., Čelko, L. Wetting behavior of wear-resistant WC-Co-Cr cermet coatings produced by HVOF: The role of chemical composition and surface roughness. Journal of Thermal Spray Technology, 30 (2021) 258-303, https://doi.org/10.1007/s11666-020-01130-6
Cihlář, J., Tinoco Navarro, L., Částková, K., Michalička, J., Kaštyl, J., Čelko, L., Kašpárek, V., Cihlář, J. Influence of LA/Ti molar ratio on the complex synthesis of anatase/brookite nanoparticles and their hydrogen production. International Journal of Hydrogen Energy, 46 (2021) 8578-8593, https://doi.org/10.1016/j.ijhydene.2020.12.080
Deák, A., Jobbágy, C., Demeter, A., Čelko, L., Cihlář, J., Szabó, P., Ábrányi Balogh, P., Crawford, D., Virieux, D., Colacino, E. Mechanochemical synthesis of mononuclear gold(I) halide complexes of diphosphine ligands with tuneable luminescent properties. Dalton Transactions, 50 (2021) 13337, https://doi.org/10.1039/D1DT01751A

2020

Remešová, M., Tkachenko, S., Kvarda, D., Ročňáková, I., Gollas, B., Menelaou, M., Čelko, L., Kaiser, J. Effects of anodizing conditions and the addition of Al₂O₃/PTFE particles on the microstructure and the mechanical properties of porous anodic coatings on the AA1050 aluminium alloy. Applied Surface Science, 513 (2020) 145780, https://doi.org/10.1016/j.apsusc.2020.145780
Slámečka, K., Jech, D., Klakurková, L., Tkachenko, S., Remešová, M., Gejdoš, P., Čelko, L. Thermal cycling damage in pre-oxidized plasma-sprayed MCrAlY + YSZ thermal barrier coatings: Phenomenon of multiple parallel delamination of the TGO layer. Surface and Coatings Technology, 384 (2020) 125328, https://doi.org/10.1016/j.surfcoat.2019.125328
Casas Luna, M., Torres Rodríguez, J., Valdés Martínez, O.U., Obradović, N., Slámečka, K., Maca, K., Kaiser, J., Montúfar, E.B., Čelko, L. Robocasting of controlled porous CaSiO₃-SiO₂ structures: Architecture – strength relationship and material catalytic behavior. Ceramics International, 46 (2020) 8853-8861, https://doi.org/10.1016/j.ceramint.2019.12.130
Montúfar, E.B., Tkachenko, S., Casas Luna, M., Škarvada, P., Slámečka, K., Díaz de la Torre, S., Koutný, D., Paloušek, D., Koledová, Z., Hernández Tapia, L., Zikmund, T., Čelko, L., Kaiser, J. Benchmarking of additive manufacturing technologies for commercially-pure-titanium bone-tissue-engineering scaffolds: processing-microstructure-property relationship. Additive Manufacturing, 36 (2020) 101516, https://doi.org/10.1016/j.addma.2020.101516
Montúfar, E.B., Slámečka, K., Casas Luna, M., Skalka, P., Ramirez Cedillo, E., Zbončák, M., Kaiser, J., Čelko, L. Factors governing the dimensional accuracy and fracture modes under compression of regular and shifted orthogonal scaffolds. Journal of the European Ceramic Society, 40 (2020) 4923-4931, https://doi.org/10.1016/j.jeurceramsoc.2020.03.045

2019

Čelko, L., Menelaou, M., Casas Luna, M., Horynová, M., Musálek, T., Remešová, M., Díaz de la Torre, S., Morsi, K., Kaiser, J. Spark plasma extrusion and the thermal barrier concept. Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 50 (2019) 656-665, https://doi.org/10.1007/s11663-018-1493-3
Torres Rodríguez, J., Gutiérrez Cano, V., Menelaou, M., Kaštyl, J., Cihlář, J., Tkachenko, S., González, J., Kalmár, J., Fábián, I., Lázár, I., Čelko, L., Kaiser, J. Rare-earth zirconate Ln₂Zr₂O₇ (Ln: La, Nd, Gd, and Dy) powders, xerogels, and aerogels: Preparation, structure, and properties. Inorganic Chemistry, 58 (2019) 14467-14477, https://doi.org/10.1021/acs.inorgchem.9b01965
Ziegelheim, J., Lombardi, L., Česánek, Z., Houdková, Š., Schubert, J., Jech, D., Čelko, L., Pala, Z. Abradable coatings for small turboprop engines: A case study of nickel-graphite coating. Journal of Thermal Spray Technology, 28 (2019) 794-802, https://doi.org/10.1007/s11666-019-00838-4
Torres Rodríguez, J., Kalmár, J., Menelaou, M., Čelko, L., Dvořák, K., Cihlář, J., Cihlář, J., Kaiser, J., Győri, E., Veres, P., Fábián, I., Lázár, I. Heat treatment induced phase transformations in zirconia and yttria stabilized zirconia monolithic aerogels. Journal of Supercritical Fluids, 149 (2019) 54-63, https://doi.org/10.1016/j.supflu.2019.02.011
Horynová, M., Remešová, M., Klakurková, L., Dvořák, K., Ročňáková, I., Yan, S., Čelko, L., Song, G.L. Design of tailored biodegradable implants: The effect of voltage on electrodeposited calcium phosphate Coatings on pure magnesium. Journal of the American Ceramic Society, 102 (2019) 123-135, https://doi.org/10.1111/jace.15888

2018

Ročňáková, I., Slámečka, K., Montúfar, E.B., Remešová, M., Dyčková, L., Břínek, A., Jech, D., Dvořák, K., Čelko, L., Kaiser, J. Deposition of hydroxyapatite and tricalcium phosphate coatings by suspension plasma spraying: Effects of torch speed. Journal of the European Ceramic Society, 38 (2018) 5489-5496, https://doi.org/10.1016/j.jeurceramsoc.2018.08.007
Tkachenko, S., Dvořák, K., Jech, D., Slámečka, K., Klakurková, L., Paloušek, D., Čelko, L. Wear of grinding rotors with thermally sprayed coatings in a high-speed mill. Wear, 412-413 (2018) 49-59, https://doi.org/10.1016/j.wear.2018.05.016
Skalka, P., Slámečka, K., Pokluda, J., Čelko, L. Finite element simulation of stresses in a plasma sprayed thermal barrier coating with a crack at the TGO/bond-coat interface. Surface and Coatings Technology, 337 (2018) 321-334, https://doi.org/10.1016/j.surfcoat.2018.01.024
Tkachenko, S., Čížek, J., Mušálek, R., Dvořák, K., Spotz, Z., Montúfar, E.B., Chráska, T., Křupka, I., Čelko, L. Metal matrix to ceramic matrix transition via feedstock processing of SPS titanium composites alloyed with high silicone content. Journal of Alloys and Compounds, 764 (2018) 776-788, https://doi.org/10.1016/j.jallcom.2018.06.086
Montúfar, E.B., Casas Luna, M., Horynová, M., Tkachenko, S., Fohlerová, Z., Díaz de la Torre, S., Dvořák, K., Čelko, L., Kaiser, J. High strength, biodegradable and cytocompatible alpha tricalcium phosphate-iron composites for temporal reduction of bone fractures. Acta Biomaterialia, 70 (2018) 293-303, https://doi.org/10.1016/j.actbio.2018.02.002

2017

Tkachenko, S., Datskevich, O., Dvořák, K., Spotz, Z., Kulak, L.; Čelko, L. Isothermal oxidation behavior of experimental Ti-Al-Si alloys at 700 °C in air. Journal of Alloys and Compounds, 694 (2017) 1098-1108, https://doi.org/10.1016/j.jallcom.2016.10.044
Obrtlík, K., Čelko, L.; Chráska, T., Šulák, I., Gejdoš, P. Effect of alumina-silica-zirconia eutectic ceramic thermal barrier coating on the low cycle fatigue behaviour of cast polycrystalline nickel-based superalloy at 900 °C. Surface and Coatings Technology, 318 (2017) 374-381, https://doi.org/10.1016/j.surfcoat.2017.03.003
Casas Luna, M., Tkachenko, S., Horynová, M., Klakurková, L., Gejdoš, P., Díaz de la Torre, S., Čelko, L., Kaiser, J., Montúfar, E.B. Interpenetrated magnesium–tricalcium phosphate composite: Manufacture, characterization and in vitro degradation test. Acta Metallurgica Sinica, 30(4) (2017) 319-325, https://doi.org/10.1007/s40195-017-0560-0
Horynová, M., Klakurková, L., Švejcar, J., Juliš, M., Gejdoš, P., Čelko, L. Failure analysis of casing of draft tube of turbine used in hydropower plant. Engineering Failure Analysis, 82 (2017) 848-854, https://doi.org/10.1016/j.engfailanal.2017.08.002
Klakurková, L., Horynová, M., Juliš, M., Gejdoš, P., Skalka, P., Remešová, M., Čelko, L. Failure analysis of massively failed compressed air cartridge. Engineering Failure Analysis, 82 (2017) 776-782, https://doi.org/10.1016/j.engfailanal.2017.07.016

2016

Slámečka, K., Skalka, P., Pokluda, J., Čelko, L. Finite element simulation of stresses in a plasma-sprayed thermal barrier coating with an irregular top-coat/bond-coat interface. Surface and Coatings Technology, 304 (2016) 574-583, https://doi.org/10.1016/j.surfcoat.2016.07.066
Ročňáková, I., Montúfar, E.B., Horynová, M., Zikmund, T., Novotný, K., Klakurková, L., Čelko, L., Song, G.L., Kaiser, J. Assessment of localized corrosion under simulated physiological conditions of magnesium samples with heterogeneous microstructure: value of X-ray computed micro-tomography platform. Corrosion Science, 104 (2016) 187-196, https://doi.org/10.1016/j.corsci.2015.12.009
Balagna, C., Fais, A., Brunelli, K., Peruzzo, L., Horynová, M., Čelko, L., Spriano, S. Electro-sinter-forged Ni–Ti alloy. Intermetallics, 68 (2016) 31-41, https://doi.org/10.1016/j.intermet.2015.08.016
Montúfar, E.B., Horynová, M., Casas Luna, M., Díaz de la Torre, S., Čelko, L., Klakurková, L., Spotz, Z., Diégo Trejo, G., Fohlerová, Z., Dvořák, K., Zikmund, T., Kaiser, J. Spark plasma sintering of load-bearing iron-carbon nanotube-tricalcium phosphate cermets for orthopaedic applications. JOM,68 (2016) 1134-1142, https://doi.org/10.1007/s11837-015-1806-9

2015

Skalka, P., Slámečka, K., Pokluda, J., Čelko, L. Stability of plasma-sprayed thermal barrier coatings: The role of the waviness of the bond coat and the thickness of the thermally grown oxide layer. Surface and Coatings Technology, 274 (2015) 26-36, https://doi.org/10.1016/j.surfcoat.2015.04.021
Slámečka, K., Čelko, L., Skalka, P., Pokluda, J., Němec, K., Juliš, M., Klakurková, L., Švejcar, J. Bending fatigue failure of atmospheric-plasma-sprayed CoNiCrAlY + YSZ thermal barrier coatings. International Journal of Fatigue, 70 (2015) 186-195, https://doi.org/10.1016/j.ijfatigue.2014.09.009
Klakurková, L., Juliš, M., Čelko, L., Horynová, M., Hégr, E., Švejcar, J. Analysis of surface defects of aluminium components with hard anodized layers. Engineering Failure Analysis, 56 (2015) 300-306, https://doi.org/10.1016/j.engfailanal.2015.01.013
Horynová, M., Juliš, M., Čelko, L., Švejcar, J. Failure analysis of induction hardened injector body. Engineering Failure Analysis, 56 (2015) 538-544, https://doi.org/10.1016/j.engfailanal.2014.10.017
Pavloušková, Z., Klakurková, L., Man, O., Čelko, L., Švejcar, J. Assessment of the cause of cracking of hydraulic hose clamps. Engineering Failure Analysis, 56 (2015) 14-19, https://doi.org/10.1016/j.engfailanal.2015.05.014

2014

Čelko, L., Díaz de la Torre, S., Klakurková, L., Kaiser, J., Smetana, B., Slámečka, K., Žaludová, M., Švejcar, J. Temperature effect on the microstructural development of Al–Ni layered binary couples produced by an unconventional method. Surface and Coatings Technology, 258 (2014) 95-101, https://doi.org/10.1016/j.surfcoat.2014.09.059
Čelko, L., Klakurková, L., Smetana, B., Slámečka, K., Žaludová, M., Hui, D., Švejcar, J. Application of sacrificial coatings and effect of composition on Al-Al₃Ni ultrafine eutectic formation. Journal of Mining and Metallurgy, Section B: Metallurgy, 50 (1) B (2014) 31-36, https//doi.org/2298/JMMB121013038C
Vítková, G., Prokeš, L., Novotný, K., Pořízka, P., Novotný, J., Všianský, D., Čelko, L., Kaiser, J. Comparative study on fast classification of brick samples by combination of principal component analysis and linear discriminant analysis using stand-off and table-top laser induced breakdown spectroscopy. Spectrochimica Acta Part B, 101 (2014) 191-199, https://doi.org/10.1016/j.sab.2014.08.036

Education:

2005: Ing: Institute of Materials Science and Engineering, Faculty of Mechanical Engineering, Brno University of Technology, Brno, Czech Republic.
Thesis: Microstructural changes of Si-alloyed aluminide protective layers on nickel-based alloys treated at high temperatures

2009: PhD.: Institute of Materials Science and Engineering, Faculty of Mechanical Engineering, Brno University of Technology, Brno, Czech Republic.
Thesis: Diffusion of several elements into surface layers of metals and their interaction
2013: Postdoc: Centro de Investigación e Innovación Tecnológica, Instituto Politécnico Nacional, Mexico City, Mexico.
Topic: Spark plasma sintering and spark plasma extrusion of aluminium or copper metal matrix composites reinforced by multiwall carbon nanotubes

2016: doc.: Faculty of Mechanical Engineering, Brno University of Technology, Brno, Czech Republic.
Thesis: Structural stability of advanced non-ferrous alloys and surface treatments

Awards, scholarships and research stays:

Award, Engineering Academy of the Czech Republic, Czech Republic, 2014
Award, Best poster presentation YUCOMAT, Montenegro, 2010
Invited lectures at Les Rencontres Internationales de la Projection Thermique, Germany, 2020, 2022, 2024
Invited lecture at National Thermal Spray Conference, India, 2023
Research stays on Powders Consolidation – Spark Plasma Synthesis and Spark Plasma Extrusion, Instituto Politécnico Nacional, Mexico, 2015 (3M), 2014 (3M), 2013 (6M)
Research stay on Processing of Coatings for High Temperature Applications, Silesian University of Technology, Poland, 2012 (2W)
Research stay on Experimental Methods for Materials Characterization, Warsaw University of Technology, Poland, 2012 (2W)
Summer school on Processing of Functionally Graded Materials, University of Minho, Portugal, 2008 (2W)
Summer school on Processing, Modelling and Design of Multilayered and Graded Materials Systems, International Centre for Mechanical Sciences, Italy (2W)
Summer school on Processing of Knowledge-based Multifunctional Materials, Imperial College London, United Kingdom, 2007 (2W)

Other activities:

Editor of the Journal of Thermal Spray and Engineering
Advisory board editor of the journal Engineering Failure Analysis
Reviewer of more than 10 international scientific journals
Member of scientific committee of the conference Les Rencontres Internationales de la Projection Thermique
Member of scientific committee of the conference International Thermal Spraying and Hardfacing Conference
Member of management committee of EU COST Action on Mechanochemistry for Sustainable Industry
Member of management committee of Czech Society for New Materials and Technologies
Member of Czech Society for New Materials and Technologies
Member of Czech Chemical Society

Reintegration action activities

Follow-up activities

ERA Talent Name	Receiving Company	Reintegration Phase in Months	Follow-up Activities
ERA Talent #1 Assoc. Prof. Amirhossein Pakseresht, PhD. (TNUAD)	Treibacher	3M	• Supervising junior researchers and students • Workshop for the coating department • Produce advanced coating for future collaboration • Joint research paper • Joint preparation of EU project proposal
ERA Talent #12 Assoc. Prof. Ladislav Čelko, PhD. (BUT)	Treibacher	3M	• Conference contribution • Workshop for ERA talents, researchers, and students • Joint EU project proposal • Contract-based collaborations • Joint research paper • Development of IPR • Workshop for Research Group • ERA talent mentoring of PhD students
ERA Talent #14 Edgar Benjamin Montufar Jimenez, PhD. (BUT)	Lithoz	3M	• Seminar to the research group • Guidance to colleagues at BUT in tech transfers • Joint research paper • Implementation of the project prepared with Lithoz and TNUAD for which the funding was approved. The project is a direct outcome of the CLiCAM project and planned secondments – when the trustful environment was built and the mentioned partners decided to prepare a joint project

Innovation Leadership Programme

A curriculum for the Innovation Leadership programme has been created based on a needs assessment conducted among senior researchers and innovators from both the Supervisory Board and the Advisory Board. The survey results helped define individual training modules within four functional areas.

Functional area	Name of the module
Entrepreneurial skills	Business Plan Preparation, Strategic Decision Making and Entrepreneurial Spirit
Technology Transfer skills	Technology Transfer Awareness
IPR protection skills	Introduction to intellectual Property Rights for Future Innovation Leaders
Enabling competences	Research Projects Development and Management, Building Capacities for Sustainable Innovation

Project

Publications

Doping effects on the tribological performance of diamond-like carbon coatings: A review - ScienceDirect

Doping effects on the tribological performance of diamond-like carbon coatings: A review

Link

Secondments

ERA Talents

Assoc. Prof. Amirhossein Pakseresht, PhD.

Omid Sharifahmadian, PhD.

Ing. Pavel Gejdoš, PhD.

Edgar Benjamin Montufar, PhD.

Michaela Remešová, PhD.

Assoc. Prof. Ladislav Čelko, PhD.

Reintegration action activities

Follow-up activities

Innovation Leadership Programme

Sign up for Newsletter